We are one of a few organisations able to offer FIT2FIT-approved training in the Quantitative (APC) method.

Quantitative face fit testing (QNFT), also known as Ambient Particle Counting (APC) or the “Portacount” method, provides a numerical measure of the Respiratory Protective Equipment’s (RPE) seal or effectiveness. This is known as a fit factor.

Known as the face fit testing “train the tester” course, it’s based heavily around the HSEs INDG479, supported by the relevant “FIT2FIT Companion”. The course covers RPE Selection, inspection, donning & doffing, pre-use checks, fit test theory & limitations, the fit test methods, equipment, diagnostics and an introduction to the applicable legislation, ACOPs and guidance documents.

The course will cover:

• Introduction to Respiratory Protective Equipment and Devices
• Risk assessing the suitability and adequacy of RPE
• RPE compliance with British and European standards
• Forms and properties of Health Hazards
• RPE Assigned Protection Factors (APF), Workplace Exposure Limits (WEL) & the EH40
• Managerial and Supervisory considerations in regard to RPE and testing
• RPE fit factors and nominal protection factors for tight-fitting masks
• Full and detailed overview of disposable (FFP) masks including correct donning, doffing and pre-use seal checks
• Full and detailed overview of half-face masks including correct donning, doffing, pre-use seal checks and relevant filters, including particulate, gas and vapour
• Introduction to Powered Air RPE
• Comprehensive understanding of all relevant legal Regulations and associated guidance including COSHH, CAR, L5 ACOP, HSG53, INDG 479 and the fit2fit companion
• Introduction to BSIF & fit2fit
• Detailed understanding of the obligations and considerations needed for Qualitative Face Fit Testing protocols
• Overview of Quantitative Face Fit Testing and when this may be required or utilised
• Clear understanding of Face Fit Testing principles, equipment, and records
• Explanation, demonstration and imitation of Fit Testing methods, best practice and compliance with the INDG 479
• All learners will partake in practice sessions for Fit Testing, mentored by our fit2fit testers
• Fit testing and RPE troubleshooting
• Pass, fail and record-keeping protocols

This course is designed for delegates responsible for providing a range of Respiratory Protective Equipment (RPE) to employees and carrying out Quantitative Face Fit Testing (QLFT) on tight-fitting RPE.

Delegates must have basic spoken and written English skills.

Successful delegates will receive a Sunbelt Certificate of Attendance.